How to get your own meter data
If your water district has replaced its meters with digital ones in the last decade, there is a good chance your meter records a reading every 15 minutes or every hour and sends it to the utility daily. That data is yours to ask for. Here is how to get it.
1. Find out what meter you have
Look at the meter itself, usually in the basement, a pit near the curb, or on the side of the house. The brand is printed on the register (the dial). Common vendors: Badger Meter, Neptune, Sensus, Mueller, Kamstrup, Itron. Your utility's website will often have a page about its "smart meter" or "AMI" program.
2. Use the customer portal if there is one
Badger Meter (BEACON / EyeOnWater). Many districts, including Jericho Water District, use Badger's EyeOnWater portal. Go to eyeonwater.com, create an account using your ZIP code and account number, and then:
- Open your meter's consumption graph.
- Set the date range to as long as you can (a full year is ideal, one irrigation season is the minimum).
- Choose the finest read interval offered (15 minute or hourly).
- Click Start Data Export, then download the results file.
The export is a CSV that the analyzer reads as-is.
Other vendors. Neptune (My360), Sensus (Customer Portal), Mueller (Mi.Net), and most others also offer exports. Any CSV with a timestamp column and either a cumulative reading or a per-interval usage column will work. Units in gallons, thousands of gallons, CCF, cubic feet, cubic meters and liters are recognized.
3. Otherwise, ask the district
If there is no portal, email or call the district's billing office and ask for an interval data export for your own account. Districts already pull this data for billing and leak alerts, so it is a small request. A template:
Subject: Request for interval meter data for my account Hello, I am a customer of [District name], account number [your account number], service address [your address]. My property is served by a digital (AMI/AMR) water meter. I am requesting an export of the interval readings for my own meter, at the finest interval available (15-minute or hourly), for the period [start date] to [end date], as a CSV file. I understand this is my own consumption data. I intend to use it to check my home for leaks and to review my irrigation schedule against the district's conservation rules. If the district provides a customer portal (for example Badger EyeOnWater) that allows this export directly, please let me know how to enroll. Thank you, [Name] [Phone]
If you get a file in a format the analyzer cannot read, open an issue with the column headers (not the data) and we will add support.
4. Run the analysis
Go to Analyze your meter, drop in the CSV, add your ZIP code and, if your district uses odd/even days, your house number. The file stays in your browser.
Privacy
The analyzer parses and processes the file locally. Nothing is uploaded unless you click "Share this analysis" at the bottom of a report, and even then only daily totals and the findings are sent, never the raw file, your address, or your name.